KEY FEATURES
| • | 8 kbytes Flash Program Memory with High Security |
| • | 512 bytes SRAM |
| • | 10-bit Successive Approximation Analog to Digital Converter (up to 6 external channels) |
| • | Op Amp Specification:
|
| • | One programmable gain (1, 2, 5, 10, 20, 49, 98) with adjustable offset voltage nulling |
| • | One general purpose with all I/O terminals accessible |
| • | 1 MHz GBW |
| • | Low offset voltage |
| • | High input impedance |
| • | Rail-to-rail input/output |
| • | Temperature Sensing Diode |
| • | True In-System Programmability of Flash Memory with 100k erase/write cycles |
| • | Dual Clock Operation providing Enhanced Power Save Modes - HALT/IDLE |
| • | 100% Precise Analog Emulation |
| • | Single supply operation: 4.5V-5.5V |
| • | Three 16-bit timers:
|
| • | Timers T2 and T3 can operate at 50 ns resolution |
| • | Processor Independent PWM mode |
| • | External Event counter mode |
| • | Input Capture mode |
| • | Brownout Reset |
| • | 20 high sink-current I/Os |
| • | USART |
| • | Virtual EEPROM using Flash Program Memory |
| • | 7 input analog MUX with selectable output destination |
OTHER FEATURES
| • | Quiet Design (low radiated emissions) |
| • | Multi-Input Wake-up with optional interrupts |
| • | MICROWIRE/PLUS (Serial Peripheral Interface Compatible) |
| • | Clock Doubler for 20 MHz operation from 10 MHz Oscillator |
| • | Thirteen multi-source vectored interrupts servicing:
|
| • | External Interrupt |
| • | USART (2) |
| • | Idle Timer T0 |
| • | Three Timers (each with 2 interrupts) |
| • | MICROWIRE/PLUS Serial peripheral interface |
| • | Multi-Input Wake-Up |
| • | Software Trap |
| • | Idle Timer with programmable interrupt interval |
| • | 8-bit Stack Pointer SP (stack in RAM) |
| • | Two 8-bit Register Indirect Data Memory Pointers |
| • | True bit manipulation |
| • | WATCHDOG and Clock Monitor logic |
| • | Software selectable I/O options
|
| • | TRI-STATE Output/High Impedance Input |
| • | Push-Pull Output |
| • | Weak Pull-Up Input |
| • | Schmitt trigger inputs on I/O ports |
| • | Temperature range: -40°C to +85°C |
| • | Packaging: 28 DIP, and 28 SOIC |
The COP8AME9 Flash microcontroller is a highly integrated COP8™ Feature core device, with 8k Flash memory and advanced features including Virtual EEPROM, dual Op Amps (one programmable gain), temperature sensor, A/D, High Speed Timers, USART, and Brownout Reset. The COP8AME9 has True In-System Programmable Flash memory with high-endurance (100k erase/write cycles), and is well suited for applications requiring real-time data collection and processing, multiple sensory interface, and remote monitoring. The same device is used for development, pre-production and volume production with a range of COP8 software and hardware development tools.
