|*************************************************************************** | National Semiconductor Corporation | Interface Products Group | IBIS Model of DS90C032TM | 16L SOIC Package |*************************************************************************** | [IBIS Ver] 2.1 [File name] 90c032tm.ibs [File Rev] 2.1 [Date] 5/24/98 [Source] File originated at National Semiconductor Corporation. Data Transmission Products group. All data based on Empirical Measurements(Bench). [Notes] File created by SBH. [Disclaimer] (C) Copyright National Semiconductor Corporation 1994 All rights reserved National Semiconductor Corporation hereby grants the user of this IBIS model a non-exclusive, nontransferable license to use this IBIS model under the following terms. Before using this IBIS model, the user should read this license. If the user does not accept these terms, the IBIS model should be returned to National within 30 days. The user is granted this license only to use the IBIS model and is not granted rights to sell, load, rent, lease or license the IBIS model in whole or in part, or in modified form to anyone other than user. User may modify the IBIS model to suit its specific applications but rights to derivative works and such modifications shall belong to National. This IBIS model is provided on an "AS IS" basis and National makes absolutely no warranty with respect to the information contained herein.NATIONAL DISCLAIMS AND CUSTOMER WAIVES ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The entire risk as to quality and performance is with the Customer. ACCORDINGLY, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY DAMAGES, WHETHER IN CONTRACT OR TORT,INCLUDING ANY LOST PROFITS OR OTHER INCIDENTAL, CONSEQUENTIAL, EXEMPLARY, OR PUNITIVE DAMAGES ARISING OUT OF THE USE OR APPLICATION OF THE IBIS model provided in this package.Further, National reserves the right to make changes without notice to any product herein to improve reliability, function, or design. National does not convey any license under patent rights or any other intellectual property rights, including those of third parties. National is not obligated to provide maintenance or support for the licensed IBIS model. Contact National at ATTN:INTERFACE APPLICATIONS/IBIS MODELS. 2900 Semiconductor Drive, M/S A2595, Santa Clara, CA 95052-8090 IBIS Open Forum disclaims all warranties. See DISCLAIM.TXT in vhdl.org:/pub/IBIS/models for the full disclaimer. | | |**************************************************************************** [Copyright] Copyright 1994, National Semiconductor, All Rights Reserved [Component] DS90C032TM [Manufacturer] National Semiconductor Corp [Package] | typ min max R_pkg 50.0m NA NA L_pkg 1.37nH NA NA C_pkg 0.26pF NA NA | |**************************************************************************** | [Pin] signal_name model_name R_pin L_pin C_pin | 1 RINA- 90C032TM_RIN 50.0m 2.07n 0.429p 2 RINA+ 90C032TM_RIN 50.0m 1.49n 0.306p 3 ROUTA 90C032TM_ROUT 50.0m 0.95n 0.146p 4 EN 90C032TM_EN 50.0m 0.95n 0.152p 5 ROUTC 90C032TM_ROUT 50.0m 0.95n 0.152p 6 RINC+ 90C032TM_RIN 50.0m 0.95n 0.146p 7 RINC- 90C032TM_RIN 50.0m 1.49n 0.306p 8 GND GND 50.0m 2.07n 0.429p 9 RIND- 90C032TM_RIN 50.0m 2.07n 0.429p 10 RIND+ 90C032TM_RIN 50.0m 1.49n 0.306p 11 ROUTD 90C032TM_ROUT 50.0m 0.95n 0.146p 12 EN* 90C032TM_EN 50.0m 0.95n 0.152p 13 ROUTB 90C032TM_ROUT 50.0m 0.95n 0.152p 14 RINB+ 90C032TM_RIN 50.0m 0.95n 0.146p 15 RINB- 90C032TM_RIN 50.0m 1.49n 0.306p 16 VCC POWER 50.0m 2.07n 0.429p | [Diff_pin] inv_pin vdiff tdelay_typ tdelay_min tdelay_max | | The '+' pin is Diff_pin and the '-' pin is the inv_pin | 2 1 0.1 0 0 0 | Receiver Vth=+/-100mV 6 7 0.1 0 0 0 10 9 0.1 0 0 0 14 15 0.1 0 0 0 | |**************************************************************************** | Receiver Input MODEL |**************************************************************************** | [Model] 90C032TM_RIN Model_type Input |Signals RINA-,RINA+,RINC+,RINC-,RIND-,RIND+,RINB+,RINB- Vinh = 2.0 Vinl = 0.8 | typ min max C_comp 1.0pF NA NA | |**************************************************************************** | | typ min max [Temperature Range] 25.0 NA NA [Voltage range] 5.0V 4.5V 5.5V | |**************************************************************************** | | [Power_clamp] |------------------------------------------------------------- | Note that the[POWER_clamp]voltage table is referenced to Vcc | and is calculated using Vtable=Vcc - Vmeasured. |------------------------------------------------------------- | Voltage I(typ) I(min) I(max) | 5.000000 0.0 NA NA 4.684211 0.0 NA NA 4.368421 0.0 NA NA 4.052632 0.0 NA NA 3.736840 0.0 NA NA 3.421050 0.0 NA NA 3.105260 0.0 NA NA 2.789470 0.0 NA NA 2.473680 0.0 NA NA 2.157890 0.0 NA NA 1.842110 0.0 NA NA 1.526320 0.0 NA NA 1.210530 0.0 NA NA 0.894740 0.0 NA NA 0.578950 0.0 NA NA 0.263160 0.0 NA NA -0.05263 0.0 NA NA -0.36842 9.89E-07 NA NA -0.68421 0.000764 NA NA -1.00000 0.077096 NA NA -5.00V 1030.0mA NA NA | [GND_clamp] | Voltage I(typ) I(min) I(max) | | 5.00V 0.0 NA NA 0.00000 0.0 NA NA -0.0263158 0.0 NA NA -0.0526316 0.0 NA NA -0.0789474 0.0 NA NA -0.105263 0.0 NA NA -0.131579 0.0 NA NA -0.157895 0.0 NA NA -0.184211 0.0 NA NA -0.210526 0.0 NA NA -0.236842 0.0 NA NA -0.263158 0.0 NA NA -0.289474 0.0 NA NA -0.315789 0.0 NA NA -0.342105 -1.5644e-006 NA NA -0.368421 -4.608e-006 NA NA -0.394737 -1.2498e-005 NA NA -0.421053 -3.1744e-005 NA NA -0.447368 -7.7822e-005 NA NA -0.473684 -0.00017322 NA NA -0.500000 -0.00034522 NA NA -5.00V -26.1mA NA NA | | |**************************************************************************** | Receiver Enable MODEL |**************************************************************************** | [Model] 90C032TM_EN Model_type Input |Signals EN,EN* Vinh = 2.0 Vinl = 0.8 | typ min max C_comp 1.0pF NA NA | |**************************************************************************** | | typ min max [Temperature Range] 25.0 NA NA [Voltage range] 5.0V 4.5V 5.5V | |**************************************************************************** [GND_clamp] | Voltage I(typ) I(min) I(max) | 5.00V 0.0mA NA NA 0.000000 0.0 NA NA -0.0315789 0.0 NA NA -0.0631579 0.0 NA NA -0.0947368 0.0 NA NA -0.126316 0.0 NA NA -0.157895 0.0 NA NA -0.189474 0.0 NA NA -0.221053 0.0 NA NA -0.252632 0.0 NA NA -0.284211 0.0 NA NA -0.315789 0.0 NA NA -0.347368 -1.9724e-006 NA NA -0.378947 -6.9632e-006 NA NA -0.410526 -2.2472e-005 NA NA -0.442105 -6.7232e-005 NA NA -0.473684 -0.00017678 NA NA -0.505263 -0.00038956 NA NA -0.536842 -0.00076118 NA NA -0.568421 -0.0013122 NA NA -0.600000 -0.002064 NA NA -5.000V -79.00mA NA NA | | [Power_clamp] |------------------------------------------------------------- | Note that the[POWER_clamp]voltage table is referenced to Vcc | and is calculated using Vtable=Vcc - Vmeasured. |------------------------------------------------------------- | Voltage I(typ) I(min) I(max) | | 5.000000 0.0 NA NA 4.684211 0.0 NA NA 4.368421 0.0 NA NA 4.052632 0.0 NA NA 3.73684 0.0 NA NA 3.42105 0.0 NA NA 3.10526 0.0 NA NA 2.78947 0.0 NA NA 2.47368 0.0 NA NA 2.15789 0.0 NA NA 1.84211 0.0 NA NA 1.52632 0.0 NA NA 1.21053 0.0 NA NA 0.89474 0.0 NA NA 0.57895 0.0 NA NA 0.26316 0.0 NA NA -0.05263 0.0 NA NA -0.36842 0.0 NA NA -0.68421 0.000791 NA NA -1.00000 0.077488 NA NA -5.00V 1059.67mA NA NA |**************************************************************************** | Receiver Output MODEL |**************************************************************************** | [Model] 90C032TM_ROUT Model_type 3-state | Signals ROUTA,ROUTB,ROUTC,ROUTD Vmeas = 1.5V |Reference voltage is at 50% of output swing Cref = 5pF |Timing specification test load capacitance value Vref = 0 |Timing specification test load voltage; GND | variable typ min max | C_comp 2.0pF NA NA | |**************************************************************************** | | typ min max [Temperature Range] 25.0 NA NA [Voltage range] 5.0V 4.5V 5.5V | |**************************************************************************** | [Pulldown] | Voltage I(typ) I(min) I(max) | | -5.00V -174.0mA NA NA -0.593684 -0.020042 NA NA -0.227368 -0.0073948 NA NA 0.138947 0.0043038 NA NA 0.505263 0.015184 NA NA 0.871579 0.024566 NA NA 1.23789 0.03209 NA NA 1.60421 0.037704 NA NA 1.97053 0.041532 NA NA 2.33684 0.043926 NA NA 2.70316 0.045292 NA NA 3.06947 0.046002 NA NA 3.43579 0.046354 NA NA 3.80211 0.04652 NA NA 4.16842 0.046602 NA NA 4.53474 0.046632 NA NA 4.90105 0.04664 NA NA 5.26737 0.046648 NA NA 10.00V 0.046648 NA NA | [Pullup] | Voltage I(typ) I(min) I(max) |------------------------------------------------------------- | Note that the[Pullup]voltage table is referenced to Vcc | and is calculated using Vtable=Vcc - Vmeasured. |------------------------------------------------------------- 10.00V -56.8mA NA NA 5.000000 -0.05347 NA NA 4.684211 -0.05293 NA NA 4.368421 -0.05233 NA NA 4.052632 -0.05162 NA NA 3.73684 -0.05076 NA NA 3.42105 -0.04966 NA NA 3.10526 -0.04822 NA NA 2.78947 -0.04637 NA NA 2.47368 -0.04397 NA NA 2.15789 -0.04093 NA NA 1.84211 -0.03721 NA NA 1.52632 -0.03271 NA NA 1.21053 -0.02739 NA NA 0.89474 -0.02128 NA NA 0.57895 -0.01438 NA NA 0.26316 -0.00679 NA NA -0.05263 0.001444 NA NA -0.36842 0.010186 NA NA -0.68421 0.019642 NA NA -5.00V 144.0mA NA NA | [GND_clamp] | Voltage I(typ) I(min) I(max) |------------------------------------------------------------- | Outputs in Tri-state. |------------------------------------------------------------- | 5.00V 0.0 NA NA 0.00000 0.0 NA NA -0.0263158 0.0 NA NA -0.0526316 0.0 NA NA -0.0789474 0.0 NA NA -0.105263 0.0 NA NA -0.131579 0.0 NA NA -0.157895 0.0 NA NA -0.184211 0.0 NA NA -0.210526 0.0 NA NA -0.236842 0.0 NA NA -0.263158 0.0 NA NA -0.289474 0.0 NA NA -0.315789 0.0 NA NA -0.342105 -1.5644e-006 NA NA -0.368421 -4.608e-006 NA NA -0.394737 -1.2498e-005 NA NA -0.421053 -3.1744e-005 NA NA -0.447368 -7.7822e-005 NA NA -0.473684 -0.00017322 NA NA -0.500000 -0.00034522 NA NA -5.00V -26.1mA NA NA | [POWER_clamp] | Voltage I(typ) I(min) I(max) |------------------------------------------------------------- | Note that the[POWER_clamp]voltage table is referenced to Vcc | and is calculated using Vtable=Vcc - Vmeasured. | Outputs in Tri-state. |------------------------------------------------------------- | 5.000000 0.0 NA NA 4.684211 0.0 NA NA 4.368421 0.0 NA NA 4.052632 0.0 NA NA 3.736840 0.0 NA NA 3.421050 0.0 NA NA 3.105260 0.0 NA NA 2.789470 0.0 NA NA 2.473680 0.0 NA NA 2.157890 0.0 NA NA 1.842110 0.0 NA NA 1.526320 0.0 NA NA 1.210530 0.0 NA NA 0.894740 0.0 NA NA 0.578950 0.0 NA NA 0.263160 0.0 NA NA -0.05263 0.0 NA NA -0.36842 0.0 NA NA -0.68421 0.000764 NA NA -1.00000 0.077096 NA NA -5.00V 1030.0mA NA NA | |**************************************************************************** | [Ramp] | typ min max dV/dt_r 3.04/572ps NA NA dV/dt_f 3.04/385ps NA NA R_load = 1MOhm | Represents an open | | [End]