Power Designer Articles Point-of-Load DC/DC
- PD-131: Precision Output Current Limiting Using Average Current Monitor Feature
- PD-130: Designing Non-Inverting Buck-Boost (Zeta) Converters with a Buck P-FET Controller
- PD-129: Comparing the Merits of Integrated Power Modules versus Discrete Regulators
- PD-111: Buck Regulator Topologies for Wide Input/Output Voltage Differentials
- PD-102: Power Management Considerations for FPGAs and ASICs
Point-of-Load DC/DC Power Supply Reference Designs
- RD-186: Small Split Rail Isolated +/- 5V Generator
- RD-184: Low Noise Split Rail Non-Isolated Boost +/- 12V Power Supply
Point-of-Load DC/DC Conversion External Articles
|
|
Point-of-Load DC/DC Converter Demo Videos
Point-of-Load DC/DC Conversion Application Notes & Eval Board Manuals
- AN-2157: Constant Current Constant Voltage Buck Converter with LM25085, or, Implementing Accurate Current Limit with LM25085
- AN-2147: LM34923 Evaluation Board
- AN-2140: LM21212-2 Evaluation Board
- AN-2131: LM21215A-1 Evaluation Board
- AN-2130: LM21215 Evaluation Board
- AN-2129: Boot Capacitor Regulation in LM25007 Constant-On-Time (COT) Converter
- AN-2119: LM8850 Evaluation Board
- AN-2112: LM25117 Evaluation Board
- AN-2107: LM21212-1 Evaluation Board
- AN-2103: LM5117 Evaluation Board
- AN-2066: LM25119 Evaluation Board
- AN-2065: LM5119 Evaluation Board
- AN-2050: LM5006 Evaluation Board
- AN-1956: LM5001 Boost Evaluation Board
- AN-1888: LM22670 Evaluation Board Inverting Topology and Application Notes
|
