Xilinx

Spartan-6 LX150T Dev Kit

Made in partnership with Avnet and Xilinx, the Spartan-6 LX150T Development Kit provides a complete development platform for the Spartan-6 LXT FPGA family. The Spartan-6 LX150T includes onboard serial gigabit transceiver interface interfaces (GTP) which, when used with the appropriate FPGA IP, enable support for PCI Express or SATA. The board also includes FMC expansion slots to extend the application specific functions.

3A Power Module
4A Power Module
LMZ13610 10A Power Module
LVDS Repeater
DDR-III Terminator
Gig Ethernet PHY

Spartan-6 LX16 Eval Kit

Made in partnership with Avnet and Xilinx, the Spartan-6 LX16 Evaluation Kit shows a Spartan-6 used in a battery powered application.

10/100 Ethernet PHY

Virtex-6 LX130T Eval Kit

Made in partnership with Avnet and Xilinx, the Virtex-6 LX130T Evaluation Kit provides a complete development platform for Virtex-6 LXT FPGA family. The Virtex-6 LX130T includes onboard serial gigabit transceiver interfaces (GTX) which, when used with the appropriate FPGA IP, enable support for PCI Express and other serdes applications. The board also includes FMC expansion slots to extend the application specific functions.

Gig Ethernet PHY

ISM Networking FMC Module

Made in partnership with Avnet and Xilinx, the ISM Networking FMC Module adds key interfaces to support a wide range of industrial, scientific and measurement requirements. The dual DP83640 IEEE 1588 compatible Ethernet PHY gives real time synchronization capability to either Spartan-6 or Virtex-6 designs.

1588 PTP Ethernet PHY

CTXIL671: 3G-SDI FMC

Made in partnership with Cooktech, the CTXIL671 FMC card enables users to design and verify their implementations against multiple HD-SDI standards. It uses an FMC expansion connector to interface to the Spartan-6 and Virtex-6 development kits.

3G SDI Equalizer
3G SDI Driver
Sync Separator

Virtex-5 FXT Dev Board

Made in partnership with Avnet and Xilinx, the Virtex-5 FXT Evaluation Kit provides the necessary features to explore PowerPC 440 based systems based on the Virtex-5 FXT FPGA family. The embedded PowerPC 440 core used in conjunction with the onboard peripherals enables users to create a complete, standalone computing system.

Gig Ethernet PHY

Virtex-5 FXT Mini Module Plus

Made in partnership with Avnet and Xilinx, the Virtex-5 FXT Mini Module Plus is designed to showcase a complete embedded processor system in a small footprint. The Power PC 440 core used in conjunction with the onboard peripherals enables users to create a complete, standalone embedded computer.

DDR-II Terminator
Gig Ethernet PHY

Virtex-4 based WaveVision 5 Data Capture Board

Designed by National Semiconductor, the WaveVision 5 Data Capture Board uses a Virtex-4 FPGA in conjunction with the WaveVision 5 software to enable users to easily evaluate National's high speed and precision ADCs. Note: The newer WaveVision 5.1 offers upgraded speed and capabilities, but is not used for all evaluation boards. Please refer to the evaluation board table to get the correct Data Capture Board

Virtex-4 based WaveVision 4 Data Capture Board

Designed by National Semiconductor, the WaveVision 4 Data Capture Board uses a Virtex-4 FPGA in conjunction with the WaveVision 4 software to enable users to easily evaluate National's high speed and precision ADCs. Note: The newer WaveVision 5.1 offers upgraded speed and capabilities, but is not used for all evaluation boards. Please refer to the evaluation board table to get the correct Data Capture Board

SDXILEVK Dev Kit

National Semiconductor created this expansion card with an EXP connector to target Spartan-3A/3E development kits. It includes the necessary FPGA IP in Verilog or VHDL source and enables low cost FPGAs to meet the stringent 3G-SDI standards. This gives designers the flexibility to choose the FPGA that best fits their product's needs.

3G SDI Equalizer
3G SDI Serializer
3G SDI Deserializer
Sync Separator
Clock Generator
4x4 LVDS Crosspoint
Low Noise LDO

ML571-1982CLK

National Semiconductor created this high-performance video clock daughter card to enable Xilinx Virtex-5 LXT FGPAs to meet stringent 3G-SDI standards. It includes the necessary FPGA IP in Verilog or VHDL source.

Sync Separator
Clock Generator

Virtex-4 based ADC10D1500RB

National Semiconductor created this reference board to showcase the performance of the ADC10D1500 – a dual, 10-bit 1.5 GSPS ADC. It integrates both the Virtex-4 and the ADC10D1500 along with the required input signal conditioning blocks. It is intended to be used with the WaveVision 5 software.

Dual 10-bit 1.5GSPS ADC
Freq. Synthesizer
2A Synch Buck
Dual 2A Buck
Low Noise LDO
3A LDO
3A Buck Reg.