|
Reference Design for the COP8S/C FLASH Families of Flash Microcontrollers with 4k-32k Memory, and Virtual EEPROM. Click or Scroll down.
Ordering:
The COP8-REF-FL1 is available from National and National distributors.
-
COP8-REF-FL1 for COP8S/C Flash BUY NOW
-
-
Summary:
A hardware reference design for the COP8S/C FLASH family microcontrollers. Realtime hardware environment, with a variety of I/O and feature functions for demonstrating the capabilities and features of the COP8S/C devices. Run Windows demo reference software, and excercise specific device capabilities.
Also can be used as a realtime target development board. Add our COP8Flash Emulator for full-featured, realtime debugging, or use our NiceMon Debugger Utility with ISP for simple debugging. Top of Page
Description:
 
This kit consists of a printed circuit board (PCB) with a pre-programmed and socketed 68pin COP8CDR9, Liquid Crystal Display, and Multi Communication Interfaces. Click on the graphic above for a block diagram.
The Windows demonstration program communicates with the PCB via dual RS232 connections. In the package we have enclosed the necessary documentation such as schematics, bill of materials, flow charts and assembler code. Top of Page
Features:
-
Windows PC user interface with graphical display
-
On-line Schematics, BOM, Flow Charts, Source Code, and Documentation.
-
PCB with pre-programmed 32k COP8SDR9 in a socket (44PLCC).
-
Dual RS232 Connectors, and 9v battery for out-of-the-box operation.
-
Multimeter - On-board/Off-board.
-
Voltage/Current/Frequency Measurements.
-
Communication/Interfaces: RS232/485, IrDA, MicroWire.
-
Matrix LC Display.
-
Expansion Connectors (keypad, etc.).
-
Sensors - Temperature, Light.
-
RF option.
-
In-System Programming
-
Documentation, Accessories, and Related Links:
Software, User Notes, Errata:
Minimum Requirements:
-
Windows OS;
-
5mb minimum on disk;
-
RS232 port;
-
3.5" Floppy Drive.
-
Box contains:
|
