|
Reference Design for the COP8AM/AN FLASH Family of Microcontrollers with 8k Memory, 10 bit A/D, Dual Op Amps, and Temp Sensor. Click or Scroll down.
Ordering:
Summary:
Top of Page
Description:
Click on the graphic above for a block diagram.
The printed circuit board (PCB) includes a pre-programmed and socketed 28pin COP8AME9, Liquid Crystal Display, and multiple Input/Output Interfaces. Onboard electronics are included for sensing Light, Pressure, Humidity, Temperature, Voltage, Current, and external A/D. Onboard Soft/Hard Reset Buttons, two Firmware Control Buttons, RS232 (DB9) connector, and Microwire/Plus (RJ11) connector. An expansion header allows additional daughter boards. Power connector for 5-16v DC supply, or 9v battery.
The Windows control program communicates with the PCB via an RS232 connection. Documentation includes Manuals, Schematics, BOM, Application Flow Charts, and Assembler Source Code.
The PCB also can be used as a realtime target development board for your applications. Onboard connectors support COP8Flash Emulators (for full-featured, realtime debugging), our NiceMon Debugger Utility (for low-cost single-step debugging), and the Kanda COP8-ISP programming tool. A complete software IDE with assembler and simulator, NiceMon Debugger, and ISP Software Utility is included on CD. Top of Page
Features:
- Stand-alone Multi-Meter operation with 7 input-channel sensing.
- Matrix LCD Display, or Windows PC graphical display.
- Create your own application, and download via ISP.
- On-line Schematics, BOM, Flow Charts, Source Code, and Documentation.
- PCB with pre-programmed 8k COP8AME9 in a socket (28 DIP).
- Voltage/Current Measurements with AGC from on-board, or external sources.
- Variable Light sensor (Room to Pitch Dark)
- Humidity sensor (20-100 RH)
- Atmospheric pressure sensor from 15 to 115kPa.
- On-chip temperature sensor.
- MicroWire and RS232 I/O with Hardware USART (to 38k bps)
- Pushbutton Firware control.
- Expansion Connectors for Daughter Board.
- NiceMon Debugger/ISP Utility and ISP cable included.
- Supports optionsl Kanda ISP tool, and COP8Flash Emulators.
- 5-16v DC operation.
- Top of Page
Documentation, Accessories, and Related Links:
Software, Firmware, User Notes:
Minimum Requirements:
- Stand-alone Multi-Meter operation:
- 5-16v DC Power Supply, or 9v Battery.
- PC Host Multi-Meter operation. Above, plus:
- Win 32bit OS.
- 2mb minimum on disk
- RS232 port
- CD ROM Drive
- Target Development Board operation. Above, plus:
- 10mb minimum on disk
- Parallel port for NiceMon/ISP cable (cable included).
- Optional COP8-EMFlash Emulator, OR
- Optional Kanda COP8-ISP Flash Programming tool.
- Top of Page
Box contains:
- Fully assembled PCB (Size & Weight: 4 " x 4.5 "; 8 oz)
- Microwire ISP Cable (PC Parallel Port to RJ11)
- PC Host Software and all documentation on CD.
- National's Windows Development IDE on CD, with NiceMon Debugger, and ISP software utilities.
- Top of Page
|
