|
Evaluation and Development Target Board for the CP3UB17 and CP3CN17 Connectivity Processors. Click on a link, or scroll down.
Ordering:
CP3000 Target Boards are available from National distributors.
- CP3-TB-UBCN17-0 Target Board for CP3UB17/CN17
Summary:
National's CP3-TB Target Boards provide a low-cost hardware application environment for evaluating the features of the CP3000 Family connectivity processors, and for debugging your CP3000 software applications.
From your host PC, download and control applications at full system speed on the realtime target board. Exercise the CP3000 device with a variety of on-board features, and communications I/O, including USB and RS232 connections back to your host PC. Designed to be used with iSystem's iC3000 Emulator and ISP Utility.
Description:
 The CP3000 target board comes fully assembled, and has its own external power supply (110v/220v), and interface cables. It can be used stand-alone, or it interfaces to a host PC through its parallel port for downloading and debugging application programs. The board includes a socket for a 100 pin QFP device (2 samples each of the CP3UB17 and CP3CN17 devices are included with the kit), a download/debug interface (DB25), CAN and USART connectors (DB9), and a variety of pushbuttons, switches, and LEDs. An expansion header allows additional daughter boards, and a Nexus connector supports the iSystems IC3000 Emulator.
Features:
- JTAG-based Nexus interface for development tools.
- Supports ISP programming utility from National.
- Realtime Target board supports four operating environments:
- DEV (Development)—execution from external SRAM
- IRE (Internal ROM Enabled)—execution from on-chip flash memory
- ERE (External ROM Enabled)- execution from on-chip and external flash memory
- ISP (In-System Programming)—execution from boot code area of on-chip flash memory.
- A variety of peripherals for debugging and I/O:
- USB interface
- CAN interface
- UART connector for on-chip UART
- On-board codec for voice/audio applications
- DIP switches
- Pushbutton switches
- LEDs
- Peripheral board connector for addition of application specific interfaces
Documentation, Accessories, and Related Links:
Minimum Requirements:
- PC USB port (desireable)
- PC Serial port (desireable)
Box contains:
- Fully assembled, non-enclosed, CP3-DB-xx1x-1 Evaluation Board with socketed CP3UB17G38 (Dimensions: 4"x 6"; Weight 10oz.)
- One CP3UB17G38 100QFP sample device.
- One CP3CN17G38 100QFP sample device.
- 2 power supplies: 110v and 220v
- USB cable
- 2 RS232 serial cables
- Printed Board User's Guide
|
