DP83xxx PHYTER® Reference Designs, Models, Drivers, and Eval Boards Home->Interface Solutions

DP83xxx PHYTER® Reference Designs, Models, Drivers, and Eval Boards

Type	Title	Description
PHYTER Design Tools	PHYTER® Ethernet Integrity Utility Tool	The Ethernet Integrity Utility Tool is an extensive Ethernet support and diagnostics tool, allowing complete PHY access for link status, device configuration, and network status monitoring.
PHYTER Software Models	DP83640 IBIS and BSDL model	IBIS model and BSDL model for the Industrial Temperature range version of the DP83640. Logic Vision Software Boundary Scan Cell file is located here.
	DP83816 IBIS Model	The I/O Buffer Information Specification (IBIS) model is a behavioral model used to perform signal integrity simulations. Click here to download the model for this device.
	DP83847 IBIS Model	The I/O Buffer Information Specification (IBIS) model is a behavioral model used to perform signal integrity simulations. Click here to download the model for this device.
	DP83847 Rollover Document	This information document lists the enhancements of each revision over A5 of the DP83847 DsPHYTER-II™
	DP83848M/T/H IBIS model	Here is the IBIS model for the DP83848 PHYTER Mini.
	DP83848J/K IBIS model	Here is the IBIS model for the DP83848 PHYTER Mini LS
	DP83848C IBIS model	Here is the IBIS model for the Commercial Temperature range version of the DP83848.
	DP83848I IBIS and BSDL models	IBIS model and BSDL model for the DP83848 Industrial Temperature range. Logic Vision Software Boundary Scan Cell file is located here.
	DP83848YB IBIS and BSDL models	IBIS model and BSDL model for the DP83848 Extreme Temperature range. Logic Vision Software Boundary Scan Cell file is located here.
	DP83849 IBIS and BSDL models	Here is the IBIS model for all the different temperature range versions of the DP83849. BSDL model for the DP83849I BSDL model for the DP83849ID BSDL model for the DP83849IF Logic Vision Software Boundary Scan Cell file is located here.
	DP83865 IBIS and BSDL Models	IBIS model and BSDL model for the Commercial Temperature range version of the DP83865. Logic Vision Software Boundary Scan Cell file is located here.
	Orcad Symbols	DP83640 OrCAD Symbol DP83849 OrCAD Symbol DP83848 OrCAD Symbol DP83865 OrCAD Symbol DP83816 OrCAD Symbol DP83847 OrCAD Symbol
PHYTER Reference Designs
DP83640 Precision PHYTER	National Reference Design	DP83640 Schematic Rev 2.0 (pdf 2.2MB) User's Guide Rev B (pdf 124KB) BOM Rev 120H (xls: 22KB) Demo board layout (zip: 641KB) The Freescale MCF5234BCCKIT ColdFire microprocessor kit includes the new DP83640 PHYTER® High Precision. DBC3C40 MercuryCode Reference Design from EBV Elektronik. The EBV MercuryCode industrial communications reference design platform is based on the Altera® Cyclone® III FPGA. This reference design features highly accurate timing over an Ethernet network using two of National’s DP83640 IEEE 1588 Precision 10/100 Ethernet PHYTER. Contact your National Sales Representative for more information on Software Design Guide C Software Reference Library
DP83849 Dual PHYTER	Schematic	DP83849 Dual Phyter Demo II Stump Jumper Rev 1.1 (pdf 142 KB)
	BOM	DP83849 Demo Board BOM Rev 1.1 (pdf 43 KB)
	User's Guide	DP83849IVS User's Guide (Use for both DP83849CVS and DP83849IVS, pdf 350 KB) DP83849IFVS User's Guide (Use for both DP83849DVS and DP83849IFVS, pdf 350 KB)
	Layout	DP83849 Dual Phyter Demo II Stump Jumper Layout Rev 1.1 (pdf 450 KB)
	DP83849 Design Acceleration Kit	The DP83849 Design Acceleration Kit includes the following Schematic in pdf and source in Orcad BOM in excel Layout in gerber and pdf
DP83848 PHYTER Single & Mini	National Reference Design	DP83848J/K Board Schematics (pdf 44KB) Evaluation Board BOM (Excel file 19KB) Layout (zip 480KB) DP83848J/K POE Board Schematics (pdf 84KB) Evaluation Board BOM (Excel file 23KB) Net List (8 KB) User's Guide DP83848J/K DP83848J (pdf 79KB) DP83848K (pdf 79KB) DP83848M/T/H MAU Trike Board Schematics (pdf 68KB) Evaluation Board BOM (pdf 42KB) Layout (zip 467KB) User's Guide DP83848M/T/H DP83848M (pdf 73KB) DP83848T (pdf 73KB) DP83848H (pdf 73KB) NXP LPC2478 PHY Connections Schematic connection between the DP83848Mini and LPC2478 (pdf 274KB) Schematic connection between the DP83848Mini LS and LPC2478 (pdf 277KB) DP83848 Rock Hopper Demo II Board Upgrades include: Improved PoE enhancements and EMI filters, replaced L2 with R121, replaced C11 and C15 with 33 pF, added note for further EMI improvement on TP_IF page Schematics Rev A2 (pdf 118KB) Rev A2 BOM(pdf 46KB) Schematics Rev B (pdf 119KB) Actual implementation of the recommended note for EMI in rev A2. This is to serve as information purposes only. BOM not available, as board has not been fabricated. User's Guide(pdf 95KB) Layout(zip 1.3 MB) DP83848 MAU Enduro Board Schematics Rev F(pdf 100KB) BOM Rev D1(pdf 42KB) User's Guide(pdf 82KB) Layout(zip 702B) POE (Power Over Ethernet) POE controllers Evaluation Boards for POEPHYTEREV -E Evaluation Boards for POEPHYTEREV -I NXP LPC2478 PHY Connections Schematic connection between the DP83848 and LPC2478 (pdf 311KB) National Semiconductor has developed the below reference schematics that include the implementation of the DP83848. Motorola Cold Fire® MCF5282 Processor IBM Power PC 440GP Embedded Processor RENESAS SH7710 RISC Microprocessor
DP83848 PHYTER Single & Mini	Third-Party Reference Designs	Additional Reference Designs using the DP83848 MotionFire Motion Control Reference Design by Arrow Electronics NEW! National Semiconductor in collaboration with Arrow Electronics and Altera developed a complete FPGA-based motor control platform with industrial communication interfaces. MotionFire consists of: * FireFighter main board: FPGA and communications board * FireDriver module: Motor drive power module A total of six galvanically isolated FireDriver plug-in power modules can be connected to the FireFighter logic platform to provide 24 phases or support for up to 12 motors. These generic 4-phase drivers provide up to 10A per phase at a DC bus voltage of 50VDC, have a 12A input current protection and are available with protected and filtered encoder and/or Hall Effect sensor inputs. Back EMF sensing on three phases facilitates the implementation of sensor-less drives, while synchronized ADC sampling is possible on all phases within the same PWM cycle. EVK1100 by Atmel Atmel launch the EVK1100 with ethernet support (DP83848). This coincides with the press release this week announcing the world's lowest power 32-bit Flash MCU with Ethernet and USB On-the-Go. MCB2300 Evaluation Boards by Keil The NXP MCB2300 Evaluation Boards by Keil introduces you to the NXP LPC23xx series of ARM microcontrollers and allows you to create and test working programs for this advanced architecture. Two versions of the board are available: the MCB2360 for the 100-pin LPC2368 and the MCB2370 for 144-pin LPC2378. These evaluation systems feature the DP83848IVV PHYTER for their Ethernet connectivity. The Quebec Badge Evaluation Kit by Future Electronics The Quebec Badge Evaluation Kit provides quick and easy evaluation of the features and capabilities of the MCF5208 ColdFire 32-bit microprocessor in combination with National Semiconductor's DP83848 Ethernet Physical layer device (PHY) for ethernet connectivity. PHYWORKX-NS848 10/100 Ethernet PHY Development Kit by More than IP The MorethanIP PHYWORKX 10/100 Ethernet PHY daughter board gives designers the ability to implement Fast Ethernet solutions for prototyping and evaluation and embedded software development. ColdFire M5208EVB by Freescale Semiconductor The cost-effective, fully functional and easy-to-use M5208EVB kit simplifies MCF5207 and MCF5208 embedded controllers product development and speeds customers to market. ColdFire M5329EVB by Freescale Semiconductor The M5329EVB Evaluation system includes everything necessary to begin development with the MCF532x processor family. The development kit features the MCF5329 based Fire Engine, a plug-in system-on-module containing 32 MB of DDR-SDRAM, 16 MB of NAND flash, 2 MB of boot flash, an audio codec, a touch screen controller, and other interfaces. MPC55xxEVB by Freescale Semiconductor The MPC55xxEVB Evaluation Kits include everything necessary to begin development with the MPC55xx family of microcontrollers. A comprehensive set of hardware and software development tool options are available including a free a flash programmer, initialization tools, and assembly level debug tool. ColdFire M5208EVB by Intec Automation Inc. This Evaluation Board/Reference Design shows how the high performance low power Coldfire MCF5208 controller can access massive amouts of memory and support established large, complex operating systems such as Linux
DP83865 GigPHYTER V	National Reference Designs	GigPHYTER V Demo Board - Reference Design DP83865-EB is no longer offered for sale. Schematic (pdf 80KB) Orcad Schematic (346KB) Software Drivers for Windows XP (zip 29KB) BOM - Bill of Materials (pdf 9KB) DP83865 Reference Design Schematic (pdf 60KB) Orcad Schematic (465 KB) BOM - Bill of Materials (900B) DP83865 Dual Footprint Reference Design Schematic (pdf 87KB) Orcad Schematic (97KB)
DP83865 GigPHYTER V	Third Party Reference Designs	National Semiconductor's partners have developed the reference designs that include the implementation of the DP83865. PHYWORKX Ethernet PHY Development Kit - 83865 by More than IP The MorethanIP PHYWORKX 10/100/1000 Ethernet PHY daughter board gives designers the ability to implement high-speed Ethernet solutions for prototyping and evaluation and embedded software development. (Product Brief) Virtex-II Pro™ Development Kit Xilinx V-5 LXT Eval Kit Xilinx Spartan-3A Xtreme DSP Starter Platform Xilinx V-5 FXT Eval Kit Xilinx Spartan-3A DSP Davinci Development Kit Xilinx V-4 PCI Express Development Kit Communications Memory Module
DP83816 MacPhyter II	National Reference Design	Board: "This NIC demonstrates basic 10/100 Ethernet functionality. The MacPHYTER-II Demo Board is a half-height PCI board, which contains the magnetic and support logic, to enable half- and full-duplex 10Mb/s and 100Mb/s Ethernet in a standard PCI slot. In addition, it includes a Wake On LAN (WOL) header, which allows it to support the latest remote wake-up functions. When accompanied with different drivers, a user is enabled to use this card with full Ethernet functionality in a wide variety of operating systems." DP83816 LQFP Demo (Schematics Rev 1.3) DP83816 LQFP Demo BOM (pdf 15KB) MAAP Users Guide (pdf 71KB)
DP83816 MacPhyter II	Driver Software	Click on the highlighted links to view the available software for your design. Windows Unix/Linux DOS PXE VxWorks Utilities Other (embedded OS)
DP83847 DsPHYTER	National Reference Design	DsPHYTER Demo Board (10/100 Ethernet Transceiver) Board: MAU Transceiver Schematic (pdf 77KB) Layout (pdf 132KB) BOM (pdf 10KB) Setup (pdf 76KB) Special Connections (pdf 4KB)
DP83847 DsPHYTER	Partner Reference Designs	National Semiconductor's partners have developed the reference designs that include the implementation of the DP83847. IBM PPC440GP Power PC Schematic (pdf 80KB) Orcad Schematic (102KB) Motorola MCF5282 Cold Fire Schematic (pdf 106KB) Orcad Schematic (169KB) Available from Future Electronics. To purchase, click here Renesas SH7710 RISC Schematic (pdf 96KB) Orcad Schematic (118KB)

·

Evaluation Boards

·