|
The following CLC devices were not affected by the CLC obsolescence. Please contact you local National Semiconductor representative for current availability information.
Interface/SDI Products
| Part Number |
Description |
| CLC001 |
Serial Digital Cable Driver with Adjustable Outputs
|
| CLC005 |
ITU-T G.703 Cable Driver with Adjustable Outputs |
| CLC006 |
Serial Digital Cable Driver with Adjustable Outputs |
| CLC007 |
Serial Digital Cable Driver with Dual Complementary Outputs |
| CLC011 |
Serial Digital Video Decoder |
| CLC012 |
Adaptive Cable Equalizer for ITU-T G.703 Data Recovery |
| CLC014 |
Adaptive Cable Equalizer for High-Speed Data Recovery |
| CLC016 |
Data Retiming PLL with Automatic Rate Selection |
| CLC018 |
8 x 8 Digital Crosspoint Switch, 1.485 Gbps |
| CLC020 |
SMPTE 259M Digital Video Serializer with Integrated Cable Driver |
| CLC021 |
SMPTE 259M Digital Video Serializer with EDH Generation/Insertion |
Data Conversion Products
| Part Number |
Description |
| CLC5526 |
Digital Variable Gain Amplifier (DVGA) |
| CLC5957 |
12-bit, 70 MSPS Broadband Monolithic A/D Converter |
| CLC5902 |
Dual Digital Tuner/AGC |
| CLC5903 |
Dual Digital Tuner/AGC |
The lifetime buy affects commercial Comlinear devices only. Military and space grade parts remain active with some exceptions due to low die bank inventory. See Comlinear Products for Military, Space, and Die for more information.
If you have any questions regarding any CLC parts, please contact your local National Semiconductor representative, your regional Customer Support Center, or the Design Support Group.
For a list of LMH replacement products, please also refer to National's "CLC Op-Amp" cross reference list.
|
 |
|
- LMP8601/LMP8602/LMP8603 - 60V Common Mode 20x/50x/100x Gain Bidirectional Precision Current Sensing Amplifiers
- LMV841Q
CMOS Input, RRIO, Wide Supply Range Operational Amplifiers
- LMV841/LMV842/LMV844Q
CMOS Input, RRIO, Wide Supply Range Quad Operational Amplifiers
- Nanopower, 1.8V, RRIO, CMOS Input, Operational Amplifier
- Single/Dual Zero Drift, Low Noise, EMI Hardened Amplifier
- Low Power, High Linearity IF and Baseband Dual 16 bit ADC Driver With Digitally Controlled Gain
- 900 MHz Fully Differential Amplifier with Output Limiting Clamp
- 2.9 nV/sqrt(Hz) Low Noise, Precision , RRIO Amplifier
- AN-1808 - LMH730033 Evaluation Board
- AN-1803 - Design Considerations for a Transimpedance Amplifier
- AN-1796 - LMP7721 Evaluation Board
- AN-1784 - LMV1022 / LMV1023 Digital Output PDM Microphone Amplifier Demo Board User's Guide
- 551012875-001 - $4.00 Description: 551012875-001 Evaluation Board
- 551012876-001 - $4.00 Description: 551012876-001 Evaluation Board
- 551012922-001 - $4.00 Description: SC-70 Amplifier Universal Evaluation Board
- LMH2100EVAL - $99.00 Description: Evaluation Board for the LMH2100 Logarithmic Power Detector
|
|
